+
  • 55-2.jpg

BQS underwater aerator

BQS underwater aerator mix partial water in pool with air in the ejector toprovide a good condition for oxygenation and oxygen transmission.We importedeffective submersible sewage pump as working pump which may avoid device error.ln conclusion, the underwater aerator has the following advantages:

The experimental center has complete equipment, which can perform trace and complete analysis of pollutants, and also has simulated operating conditions such as physicochemical, biochemical, and advanced treatment. The company can customize and manufacture equipment for customers, as well as provide guarantees for their later operation and debugging.


Key words:

BQS underwater aerator



Purpose

BQS underwater aerator mix partial water in pool with air in the ejector toprovide a good condition for oxygenation and oxygen transmission.We importedeffective submersible sewage pump as working pump which may avoid device error.ln conclusion, the underwater aerator has the following advantages:
1、strong oxygenation capacity,low energy consumption ( the water flow ofimported pump may be enhanced by 30-40% than domestic pump under the samepressure)
2、sewage mix with sludge totally and the oxygen distribute uniformly in themixture.
3、Rapid and stable water flow may avoid sludge deposition.
4、Self-suction, no blower is needed to supply pressurized air, no noise.
5、Blower room or gas pipeline is not a necessity, thus the infrastructure invest-ment is lower than other aerator.
6、Low maintenance cost,easy to install,and can be installed during theoperation period of the sewage treatment plant.

 

working principle

Underwater aerator develops on the basis of jet aeration which is new and eficient. it consists of submersible pump and jet component.The submersible pump discharges water through the nozzle of ejector and creates a vacuum state in suction room.The air enters into ejectorthrough intake tube under the pressure difference, and then blends with water flow vigorously driven by rapid fiow.The air is crushed into tinyair bubbles to form uniform gas turbid liquid.The gas turtbid lquid ejects from the ejector and forms a strong vortex in the pool center, thus alarge amount of oxygen flows into the pool.
 

Main technical parameter and installation dimension

Auxiliary device

Application scope

This underwater aerator can be equipped in oxygen-ation device for sewage treatment or aquaculture. Thefollowing items are necessary for its working environment:
1、the water temperature shall be less than 40°c
2、water PH shall be between 6-11
3、water shall be non-flammable liquid
 

Outline and dimension drawing

Recommended products



1、High strength                         ​​​​​​​2、 high film hanging rate

1、The gas-liquid interface is large     2、The bubble diffuses evenly           3、The disc body is firm                 ​​​​​​​4、Long service life

1.Small aeration bubble 2.The gas-liquid interface is large 3.The bubble diffuses evenly 4.The disc body is firm 5.Long service life of diaphragm       6、Can be promoted                     ​​​​​​​7、Easy to install without pumping

1.Small aeration bubble 2.The gas-liquid interface is large 3.The bubble diffuses evenly 4.The disc body is firm 5.Long service life of diaphragm       6、Can be promoted                     ​​​​​​​7、Easy to install without pumping

Product Consultation